点击图片查看大图
RigPower主要产品系列
RMP II ® Series
Typical Applications 典型应用
To move a land drilling rig, it must be disassembled into components small enough to fit on standard highway trucks. Given the need to complete the moves as quickly as possible, it is necessary to have a means of quickly and safely connecting the large electrical cables which power the many components of the rig. On a typical land rig the following connections require high amperage single pole electrical connections：
Secure Mount Series
Background
Existing board socket and pin connectors are mounted into a large expensive piece of insulating board, usually fiberglass or melamine, and requires a precision mounting hole. Small knurls on the shaft of the connectors are pressed into the mounting hole to prevent rotation. Over-tightening of the connector can easily strip the knurls out of the mounting hole, rendering the connector inoperable. Additionally, the design of the rear of the existing connector does not allow for direct attachment of a standard electrical lug and can not carry amp loads offered by the Secure Mount receptacle.
VFD-1 Series
